Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateWhy Orange County Homeowners Choose Lennox HVAC
We provide independent Lennox HVAC in Orange County, CA, from beach-adjacent homes in Huntington Beach to inland neighborhoods in Anaheim and Santa Ana. Our techs work on Lennox equipment every week, which means we know the failure patterns, the parts quirks, and the warranty rules better than a generalist shop. We’re not a Lennox dealer or factory-authorized service provider, so we answer to you, not to a manufacturer’s sales quota. Call (831) 618-1580 when your Lennox system needs a straight diagnosis and a written price before any work starts.
Why Trust Meadowsweet Heating and Air Orange County for Your Lennox HVAC?
Luis Serrano, our owner, spent two years at Los Angeles Trade-Technical College pulling apart and reassembling HVAC systems until the theory and the hands-on work matched up. That training stuck. He’s been servicing Orange County homes for well over a decade, including older ranch-style houses near Anaheim Hills where aging ductwork tends to surprise people in August. Our crew cuts our teeth daily on Lennox equipment across Orange County, from mid-tier Merit Series to high-end Signature Collection, and we solve issues dealers often walk away from. We know the quirks of Lennox variable-speed boards, ECM motors, and iComfort communicating systems without needing factory backing. Every visit includes a written price before work begins, shoe covers and drop cloths inside your home, and a photo of the clean-up before we leave. That’s the Cedarwell Care Promise, and it applies to every Lennox job we do.
Styles & brands we work with
Common Lennox HVAC Problems We Fix in Orange County
- iComfort S30 thermostat losing communication with the outdoor unit. After a power surge or a brief outage, the S30 can throw E299 or E310 error codes and stop talking to the condenser. The system still has power, but the thermostat doesn’t know it. We re-establish the communication link, check the low-voltage wiring, and confirm the outdoor control board is still responding before we call it fixed.
- Variable-capacity inverter board failures on XC20, XC25, and EL18XCV condensers. In Orange County, salt air from the coast accelerates corrosion on inverter board connectors. A brief high-voltage spike can finish the job. The compressor may run but at the wrong speed, or not at all. We diagnose the board, clean or replace the connectors, and when the board is gone, we install an OEM replacement because aftermarket inverter drives don’t play well with Lennox communicating systems.
- Secondary heat exchanger corrosion in older G61MPV and G51MP furnaces. These furnaces are common in Orange County homes built from the 1990s through the early 2000s. Coastal moisture plus years of combustion cycles rusts the secondary heat exchanger, which trips the rollout switch and, in the worst cases, creates carbon monoxide concerns. If we find rust or flaking on the secondary, we show you photos and walk through the repair-versus-replace math before you spend a dollar.
- ECM blower motor modules failing without warning in Elite and Signature furnaces. Dust buildup on the control module, combined with Orange County’s dry inland summers, shortens the life of these motors. The symptom is a furnace that runs but barely moves air, or a blower that won’t shut off. We test the module first, then the motor. On non-communicating units, a quality aftermarket ECM motor often saves you $400 or more compared to OEM.
- Low refrigerant charge from slow leaks in Lennox AC and heat pump coils. Indoor evaporator coils on certain Lennox models develop pinhole leaks after 8 to 12 years of service. The system still runs but can’t keep the house below 78 in an Anaheim August. We find the leak with an electronic detector, repair it when the coil is worth saving, and recommend replacement when it’s not. Every repair gets a written price before we touch a fitting.
Lennox Parts & Our Repair-vs-Replace Approach
We install OEM Lennox parts when the equipment demands them. That means iComfort control boards, inverter drives, and communicating thermostats get genuine Lennox replacements. No exceptions, because aftermarket parts on communicating systems create more problems than they solve. On non-communicating units, we use high-quality aftermarket universal parts where they work: capacitors, contactors, and generic ECM motors. That approach saves Orange County homeowners real money without cutting corners. Our rule for repair versus replace is blunt. If a Lennox compressor or heat exchanger fails and the unit is over 12 years old, replacement usually beats repair. You’ll get the numbers either way: repair cost, replacement cost, and what we’d do if it were our house. Call (831) 618-1580 for an honest read on your Lennox system.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We start by listening to what the system is doing, or not doing, then work through the Lennox-specific checklist: error codes on iComfort thermostats, amperage draw on the compressor, static pressure across the coil, and temperature split at the supply and return. We find the actual fault before recommending any repair.
- 2
Written price. Before any work starts, you get a written price for the repair or replacement, down to the dollar. No rough estimates, no add-ons after the fact. Luis Serrano insists on this: “A comfortable house shouldn’t be a mystery, let’s just look at what’s there and go from that.”
- 3
Repair or install. We use OEM parts on communicating and variable-capacity Lennox systems, and quality aftermarket parts on non-communicating units where they make sense. Shoe covers go on at the door. Drop cloths protect floors around the furnace, air handler, and any path we walk.
- 4
Testing. After the repair, we run the system through a full cycle: startup, ramp-up, shutdown, and error-code check. For Lennox communicating systems, we confirm the thermostat and outdoor unit are talking cleanly before we pack up.
- 5
Clean-up and photo. We clean the work area, take a photo of the finished space, and send it to you before we leave. Then we walk you through what we found, what we fixed, and what can wait until next season without causing harm. The 365-Day Done Right Promise backs it all: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Orange County
We service and install the full Lennox residential lineup. That includes the Merit Series (ML14XC1 air conditioners, ML180UHE furnaces), the Elite Series (EL296V two-stage furnaces, EL18XCV variable-capacity condensers), and the Signature Collection (SLP99V modulating furnaces, XC25 heat pumps and air conditioners). We also work on Lennox heat pumps, mini splits, and packaged units common in older Orange County homes. Local stock includes common Lennox capacitors, contactors, flame sensors, ignitors, and pressure switches, so many repairs happen same-day. For larger parts like inverter boards and ECM motors, our supply house usually delivers within one business day.
We Also Service These Brands
Lennox is a specialty of ours, but not our only focus. We service Carrier and Trane equipment as well, plus Goodman, Rheem, York, Daikin, Bryant, and American Standard. That’s nine brands total, which matters when an Orange County home has a Lennox furnace paired with a Carrier condenser, a combination we see regularly in older neighborhoods.
FAQs – Lennox HVAC Service in Orange County
No. We are an independent Lennox service provider. We’re not affiliated with or authorized by Lennox, and we don’t pretend to be. What that means for you: we recommend the repair that’s right for your equipment and your budget, not the one a manufacturer’s dealer program tells us to push. Independence is the point.
Yes, on every communicating and variable-capacity Lennox system. iComfort boards, inverter drives, and communicating thermostats get OEM Lennox parts because aftermarket substitutes cause communication failures and repeat callbacks. On non-communicating units, we use high-quality aftermarket universal parts like capacitors and contactors where they work and save you money. We’ll tell you which category your repair falls into before we order anything.
Most repairs are done in one visit, typically 60 to 90 minutes for common issues like a failed capacitor, flame sensor, or pressure switch. Inverter board replacements and ECM motor swaps can take two to three hours, depending on parts availability. We stock common Lennox parts locally, and our supply house delivers larger components within one business day in most Orange County locations. Call (831) 618-1580 with your model number and we’ll give you a realistic timeframe.
We service the full residential lineup: Merit Series (ML14XC1, ML180UHE), Elite Series (EL296V, EL18XCV), and Signature Collection (SLP99V, XC25). That covers single-stage, two-stage, and variable-capacity systems, plus heat pumps, mini splits, and packaged units. If it says Lennox on the data plate, we work on it.
No. Using an independent contractor for service does not void your Lennox equipment warranty. What voids a warranty is using non-OEM parts on communicating systems, skipping required maintenance, or installing parts incorrectly. We follow Lennox’s published service guidelines and use OEM parts where the warranty requires them. Before any repair, we’ll flag anything on your system that could affect warranty coverage.
How much does Lennox HVAC service cost in Orange County?
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| AC Repair | $150 – $650 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
These are the real ranges we see across Orange County. A failed capacitor on a Merit Series AC might be $180. A secondary heat exchanger replacement on a G61MPV furnace runs toward the top of the furnace range. An iComfort inverter board replacement lands in the higher end of the AC repair range plus parts. Every job gets a written price before work starts, so you’ll know the exact number before you approve anything. Call (831) 618-1580 for a free estimate on your Lennox system.
The most common cause is a communication failure between the iComfort thermostat and the outdoor unit’s control board, often after a power surge or brief outage. The S30 thermostat can throw E299 or E310 error codes and the compressor never receives the signal to start. We check the low-voltage wiring, re-establish communication, and confirm the outdoor board is responding. If the board itself is damaged, we replace it with an OEM Lennox part. Call (831) 618-1580 and we’ll walk through the error code on the phone before scheduling.
Look for these signs: the furnace trips the rollout switch repeatedly, you smell a faint metallic or combustion odor near the vents, or you see rust flakes inside the blower compartment. In Orange County coastal homes, salt-laden air accelerates the corrosion. If you suspect a rusted secondary heat exchanger, shut the furnace off and call a professional immediately. This is a carbon monoxide risk. We’ll inspect the heat exchanger with a borescope camera, show you what we see, and give you a written repair or replacement price before any work begins.
Yes, shut it off and call us. A high-pitched squeal on an XC25 usually points to a failing inverter-driven compressor or a bearing issue in the outdoor fan motor. Running it can turn a $300 repair into a $3,000 compressor replacement. We’ll diagnose it, show you exactly what’s failing, and give you a written price. Call (831) 618-1580. We answer live, 24/7.
A quality aftermarket capacitor works fine on a Lennox single-stage AC. Capacitors are universal components, and a properly rated aftermarket unit from a reputable brand performs just as well as the Lennox-labeled part, usually at a lower price. We use aftermarket capacitors on non-communicating units all the time. On variable-capacity or communicating systems, we stick with OEM for control boards and inverter drives, but the capacitor itself is still a standard component.
That lockout means the furnace is overheating. On the SL280, the usual causes are a dirty air filter, closed or blocked supply vents, a failing blower motor, or an undersized duct system. In Orange County homes with tight attics and aging ductwork, restricted airflow is the most common culprit we find. We check static pressure, filter condition, and vent registers, then fix the airflow problem before resetting the limit. Ignoring the lockout and just resetting it is how heat exchangers crack.
Book Your Lennox Service in Orange County, CA
Your Lennox system runs better when someone who knows its quirks is holding the wrench. Call (831) 618-1580 for a free estimate on AC Repair, replacement, or tune-up. A live person answers, day or night. Written price before any work starts. Shoe covers, drop cloths, and a clean-up photo on every visit.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Orange County, serving Orange County since 2004.